When two channels are all you need, make it two ultrahigh-bandwidth, high-current channels from the company that invented the stereo receiver. The HK 3480 features seven audio inputs, four video inputs (including one on the front panel), 30 AM/FM station presets, VMAx surround synthesis from stereo sources, three-step dimmable fluorescent display, a phono preamp, pre-out/main-in jacks, gold-plated inputs and a separate subwoofer output. Also included is a multicomponent system remote control.

SPECIFICATIONS:

Audio
Stereo Mode :
Continuous Average Power (FTC) Per Channel :		120 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms 150 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms
Input Sensitivity/Impedance Linear (High-Level) :		200mV/47k ohms
Signal-to-Noise Ratio (IHF-A) :		95dB
Frequency Response at 1W (+0dB, –3dB) :		10Hz – 110kHz
High Instantaneous Current Capability (HCC) :		±45 amps
Transient Intermodulation Distortion (TIM) :		Unmeasurable
Rise Time :		16µsec
Slew Rate :		40V/µsec
FM Tuner
Frequency Range :		87.5 – 108MHz
Usable Sensitivity :		IHF 1.12µV/13.5dBf
Signal-to-Noise Ratio :		Mono/Stereo 73/72dB
Distortion :		Mono/Stereo 0.3/0.4%
Stereo Separation :		40dB @ 1kHz
Selectivity :		±400kHz, 65dB
Image Rejection :		>80dB
IF Rejection :		>100dB
Tuner Output Level :		1kHz, ±100kHz, Dev 500mV
AM Tuner
Frequency Range :		520 – 1720kHz
Signal-to-Noise Ratio :		>40dB
Usable Sensitivity :		Loop 500µV/M
Distortion :		1kHz, 50% Mod 0.8%
Selectivity :		±10kHz, >25dB
Video
Television Format :		NTSC/PAL/SECAM
Input Level/Impedance :		1Vp-p/75 ohms, unbalanced
Sync Polarity :		Negative
Output Level/Impedance :		1Vp-p/75 ohms, unbalanced
Video Frequency Response :		10Hz – 10MHz
General
Power Requirement :		AC 220-240V / 50Hz
Power Consumption :		3W standby, 280W maximum (both channels driven)
Unit Dimensions :
Width :		442mm (17.4 inches)
Height :		168mm (6.6 inches)
Depth :		382mm (15 inches)
Unit Weight :		10.44kg (23.0 lb)