PRODUCT TYPE		Home Theatre Projector
PRODUCT NAME		EH-DM2
PRODUCT CODE		V11H302153
PROJECTION METHOD		Front
SPECIFICATION OF MAIN PARTS
LCD		Size	0.55 inches wide
		Driving method	Poly-Silicon TFT Active Matrix
		Pixel number	854 x 480 pixels
		Native resolution	W-VGA
		Aspect ratio	16:9
		Pixel arrangement	Stripe
PROJECTION LENS		Type	Digital Zoom and Manual Focus
		F-number	1.44
		F-number	16.6mm
		Zoom ratio	Digital Zoom 1.0 - 1.35
		Lens Cover	Slide lens shutter (Manual)
LAMP		Type	120W UHE ETOR Lamp
OPTICAL SYSTEM		Dichroic Mirror Separation & Prism combine method
SCREEN SIZE (PROJECTED DISTANCE)
		30-300 inches (0.87m - 8.97m) (Wide)
		30-300 inches (1.18m - 12.11m) (Tele)
HIGH BRIGHTNESS MODE		1200 Lumens
SOUND
OUTPUT		Stereo Speaker (8w x 2 / 8ohm)
MODE		DVD: Concert, Drama, Action, Sci-Fi (Science Fiction) CD : Classic, Jazz, Rock, Digital
COLOUR REPRODUCTION		Full colour (16.77 million colours)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE		Resize	1280x1024 / 1024 x 768 / 800 x 600 / 640 x 480
VIDEO I/O
DISPLAY PERFORMANCE		Input Signal Video Standard	NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
		Input Terminal Video	Composite Video: RCA x 1 Component Video: RCA x 1
		Audio	RCA x 1 (in common with Analogue RGB)
OUTPUT SIGNAL
AUDIO ANALOGUE		Head phone: 25mW / 32 ohm
AUDIO DIGITAL:		1V rms
OUTPUT TERMINAL
AUDIO ANALOGUE		Headphone : Stereo jack (3.5mm)
AUDIO DIGITAL		RCA x 1
DVD UNIT
LOADING		Slot
MEDIA		DVD Video (Zone 4), VCD, SVCD, Audio CD, MP3(CD/DVD), WMA(CD/DVD), JPEG ,DivX(CD/DVD) ,DivX Ultra(CD/DVD), Dual Disk, DVD-R/RW, DVD+R/RW, DVD-ROM, CD-R/R, CD-ROM, DVD-VR(w/wo CPRM)
AUDIO FORMAT		Dolby Digital, DTS, MP3, ,MPEG-2, LPCM
FUNCTION		DVD Player, Playing from USB flash drive or USB memory card reader, etc
CONTROL I/O
USB I/O		USB Type A ( for Photo Viewer )
SERIAL I/O		D-sub 9pin x 1
KEYSTONE CORRECTION		Vertical: -15 to +15 degrees
OPERATING TEMPERATURE
		5°C to 35°C (41°F to 95°F) (20% to 80% Humidity) Thermal shut down > 45 °CC
		Cool-down period	Instant Off
		Start-up period	Approx: 4 seconds
POWER SUPPLY VOLTAGE		100-240 VAC ±10%, 50/60Hz
DIMENSIONS
EXCLUDING FEET		320mm(W) x 230mm(D) x 127mm(H)
MAXIMUM DIMENSION		320mm(W) x 230mm(D) x 135mm(H)
WEIGHT		Approx. 3.8kg
FAN NOISE
		High Brightness Mode	29dB
ACCESSORIES
POWER CORD		3.0m
CARRY CASE		Included
REMOTE CONTROL		Stick type
USER MANUALS		Included
BATTERY		AA x 2
WARRANTY*		2 years
* excluding lamp
* For more information visit Epson Projector Warranty

Product Options

Product Code	Item Code	Description
ELP-LP44	V13H010L44	E-TORL Lamp

Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are rademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

A Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.