

Harman Kardon AVR 355
7 x 65W 7.1-Channel A/V Receiver With HDMI™ 1.3a Repeater, Audio/Video Processing and Upscaling to 1080p
The AVR 355 includes a full complement of Dolby® and DTS® processing technologies, HDMI™ repeater capability, Faroudja DCDi Cinema® processing, EzSet/EQ™ equalization, and Zone II and A-BUS® multiroom capability. It connects to a universe of digital and analog sources, as well as to external amps. And with The Bridge II docking station, it will even play, control and charge your iPod. To ensure that everything works together seamlessly, the AVR 355 features a full-color graphical user interface and an eight-device programmable remote. Harman Kardon® founder Dr. Sidney Harman has always believed technology should serve users, not intimidate them. The AVR 355 is a perfect case in point.
-
Amplifier Type: High current 35 amps
-
Bandwidth @ 1W (+0dB/-3dB): 10Hz- 130kHz
-
Audio multizone capability with remote
-
ABUS Ready/ EzSet/EQ II
-
3 Coax Digitial inputs , 3 Optical Digital inputs/ 1 Coax Digital Output, 1 Optical Digital Output
-
3 HDMI Inputs, 1 HDMI Outputs - 1.3a with audio/video processing
-
Video processing/conversion by Faroudja DCDi Cinema scaling to 1080p
-
Dimentions (H x W x D): 151mm x 440mm x 351mm; Weight 14.4kg
SPECIFICATIONS:
| General |
| Type : |
|
7.1-Channel AVR |
| Stereo Power (FTC) / 20Hz – 20kHz, 8 ohms, both channels driven : |
|
66W x 2 |
| Multichannel Power (FTC) / 20Hz – 20kHz, 8 ohms, all channels driven : |
|
50W x 7 |
| Amplifier Type : |
|
High-current ±35 amps |
| THD @ Impedance : |
|
0.07% @ 8 Ohms |
| Bandwidth : |
|
20Hz – 20kHz |
| Bandwidth @ 1W (-3dB) : |
|
10Hz – 130kHz |
| Signal-to-Noise Ratio (IHF-A) : |
|
100dB |
| Power Supply : |
|
Independent front & rear |
| Surround Modes : |
|
Dolby® Digital Plus Dolby TrueHD Dolby Digital EX Pro Logic® IIx Dolby Virtual Speaker DTS-HD DTS-HD Master Audio DTS® 5.1 DTS-ES® 6.1 Discrete & Matrix DTS 96/24™ DTS Neo:6® Logic 7® |
| Headphone Modes : |
|
2-Channel, Dolby HP |
| Multizone Capability : |
|
Audio |
| Assignable Rear-Channel Amplifiers : |
|
Yes |
| EzSet : |
|
EzSet/EQ™ |
| S-Video/Component Video Inputs : |
|
4 |
| Analog Audio Inputs : |
|
6 |
| Digital Audio Inputs : |
|
Rear panel 2/2/0 Front panel 1/1/0 |
| Digital Audio Outputs (Coax/Optical) : |
|
Rear panel 1/1 |
| Digital Input Polling : |
|
All video inputs |
| Direct Audio Inputs : |
|
7.1 |
| HDMI™ : |
|
1.3a With audio/video processing Inputs: 3 Output: 1 |
| Preamp Outputs : |
|
7.1 Channels |
| Component Video Inputs (Assignable) : |
|
3 @ 100MHz |
| Bass Management : |
|
Quad crossover |
| On-Screen Display : |
|
Yes, on HDMI™ and component |
| Input Titling : |
|
All inputs |
| DSP Processor : |
|
Cirrus® CS 49700 |
| Output DACs : |
|
192kHz/24-bit |
| Video Processing / Conversion : |
|
Faroudja DCDi Cinema®/scaling to 1080p |
| High-Resolution GUI : |
|
Yes |
| A/V Sync Delay : |
|
80mS |
| System Remote : |
|
7-Device preprogrammed |
| IR In/Out Jacks : |
|
Yes |
| Discrete Remote On/Off Codes : |
|
Yes |
| Speaker Terminals : |
|
Color-coded binding posts |
| Dimensions (H x W x D) : |
|
151mm x 440mm x 351mm |
| Weight : |
|
13.6kg |